Ena Yellow Pineapple Bamboo Pendant Lamp Shade
Product Details
Description
Our bestselling Ena lampshade in a fresh new summer print. This small drum pendant lampshade is made from woven bamboo, and features mustard yellow pineapple block print all the way around.
Light bulb not included. Pair this lampshade with a Tala Pluto LED light bulb to cast your room in a warm glow.
Features
Style: Lamp shade
- Maximum wattage:
- 40W
- Variations may occur
Dimensions
- Height:
- 23 cm
- Width:
- 30 cm
- Depth:
- 30 cm
Materials & Care
- Bamboo, Iron
- Wipe clean only
- Do not exceed maximum wattage
- Do not use abrasive cleaners
- Further care instruction included with product
- Domestic use only
- Not suitable for bathrooms or humid environments
- For indoor use only
More Information
How to choose the best lighting
- We recommend LED bulbs as they are more energy efficient, typically lasting at least 15000 hours and using 90% less energy than a traditional halogen bulb.
- This product was made using natural materials and might differ slightly from the images. Variations contribute to the character of every piece and are not considered flaws.
Delivery & Returns
Lamp Shade FAQs
What fittings come with this lamp shade?
All of our lampshades come with conversion rings so they can fit B22 and E27 bulbs.
How do I choose the right lamp shade size?
1. Measure the lamp - If you have a circular base then measure straight across. If you have a square base then measure diagonally. Multiple this number by two for the right shade width.
2. Measure the length - Your shade should be around a third of the total height of the lamp. This way it covers the bulb and the harp without looking disproportionate to the base.
There are also some safety precautions to take into account when choosing the size of your shade, so make sure you always read any safety labels or leaflets included with your lamp shade.How do I change a lamp shade?
1. Turn the light switch off and allow your bulb to cool.
2. Assess how your shade is attached to the lamp.
3. If your shade is connected by the light bulb, unscrew the bulb, remove the lamp shade, replace with your new lamp shade and re-screw the bulb back into place.
4. If your shade is connected by a tip or finial screwed on top, unscrew the tip, lift the shade off to remove it, replace with your new shade, and re-screw the tip.
5. Turn the light switch on to see how it looks.Where can I use this lamp shade?
Many of our lamp shades are fitted with a reversible gimble, allowing you to use as a table lamp shade and ceiling lamp shade. Read our lighting guide on how to choose the best lamp shades for styling tips and tricks.